Van Norman 944-S & 777-S
Van Norman Boring Bar Parts for the model 944-S and 777-S with .562" x .812" Tooling
Adjustment Screw Set for a Van Norman Boring bar bit holders.
Threads are 9/32 x 32 threads per inch.
Set contains 1 short, 1 medium, and 1 long adjusting screw.
Universal portable boring bar anchor assembly. This anchor kit is used to mount a portable boring bar to the cylinder block when boring cylinders. It will work with most portable boring bars like Kwik Way, Van Norman, Rottler, Lempco, Storm Vulcan and more.
Adjustment Screw for a Van Norman Boring bar bit holder.
Threads are 9/32 x 32 threads per inch.
Over All Length is @ 1.032"
Adjustment Screw for a Van Norman Boring bar bit holder.
Threads are 9/32 x 32 threads per inch.
Over All Length is @ 1.275"
Adjustment Screw for a Van Norman Boring bar bit holder.
Threads are 9/32 x 32 threads per inch.
Over All Length is @ 1.625"
Bit for Van Norman Portable Boring Bars.
.375 Diameter x 7/8 Length
This bit is used to cut down sleeves flush with the top of the cylinder block.
.375 Diameter x 7/8 Length
BE-1119
Positive Rake bit for use with Counter Bore / Sleeve Trimming and Cylinder Chamfering Tool Holders
BE-1120
Premium Negative Rake Carbide Boring Bar Bit.
Used on the Cylinder Boring Tool Holders.
3 useable edges on each side.
BE-1120
HD Multi-Coated Negative Rake Carbide Boring Bar Bit.
Used on the Cylinder Boring Tool Holders.
3 useable edges on each side.
BE-8101
Premium Carbide Positive Rake Bit for tooling that uses a positive rake cutter tip.
Used on Blind Hole and some Cylinder Boring Tool Holders.
Short Indexable Bit holder for a Van Norman Model 944-S Boring Bar.
Cutter Tip: BE-1120